|
|
F350 |
|
2ch Input Type Digital Indicator |
|
|
|
|
|
|
|
- Calculation and judgment outputs can be made with respect to 2ch input values of strain gauge type sensors.
- Calculation functions
(ch1＋ch2, ch1−ch2, |ch1−ch2|, High select, Low select）
- 9 points of judgment outputs are equipped.
- 3000 times/sec high-speed digital processing
- Equivalent Input Calibration makes easy calibration by inputting the Rated Value of a sensor by keypad.
|
|
|
|
|
|
|
|
|
F340A |
|
Compact Type Digital Indicator |
|
|
|
|
|
|
|
- Equivalent Input Calibration makes easy calibration by inputting the Rated Value of a sensor by keypad.
- Analog peak hold function provides the ultra-high speed peak hold.
- One touch Zero function.
- Compact Square DIN96 size.
- High speed HIGH/ LOW limit comparison function.
|
|
|
|
|
|
F320 |
|
Digital Indicator |
|
|
|
|
|
|
|
- Mini DIN 96 x 48mm size.
- Standard built-in RS-485 with Modbus-RTU communication protocol.
- 2000times/sec High-speed A/D conversion
- High/ Low Limit Comparison Function with Hysteresis
- Peak/ Sample hold functions
- Digital Zero function.
|
|
|
|
|
|
F490 |
|
Portable Digital Indicator with Recording Function |
|
|
|
|
|
|
|
- Suitable for portable use with lightweight design of 380g.
- The measurement data is recorded in CSV form in its internal memory.
- The data recorded can be referred to and copied through USB interface.
- Various display modes such as graphic display, recorded data display and so on
- Multi Calibration function enables to store the calibration value for 4ch and allows the calibration value to select at will as required by the site sensor.
- 4 types of Hold functions such as Sample, Peak, Bottom and Peak to peak Hold can set the observation range.
|
|
|
|
|
|
|
