PERIPHERAL EQUIPMENT
The UNIPULSE Peripheral Equipment is available to provide the needed sub-components to provide you with the exact weight force, or production control systems you need. Single source supplying eliminates the need for complex setup and simplifies vendor responsibility decisions. In most cases a simple two-wire connection is all it takes to interface UNIPULSE instrumentation and UNIPULSE support devices. Quality Control, Supervisor visibility, and application alarm capabilities are just some of the advantages your application site can have when using UNIPULSE peripheral devices.
DS252 Paperless Printer
384KB 1.73MB
  • Mass-recording of weight and load data from an indicator into a CF card.
  • Recorded data is in the ease-to-handle CSV format.
  • High-level statistical calculation function of total, sub-total, maximum, minimum, average, standard deviation, frequency distribution and so on.
  • Double channel recording function for the data from two indicators ( Standard equipped with 2ch of SI/F)
  • One hundred types of code using alphanumeric, Kana, or symbolic characters.
M350 Intelligent Printer for Industrial Use
3.82MB
  • Statistical, total, multi-adding (4ch), histogram, displacement chart printing.
  • Code No. divided-function classifies into up to 32 categories per channel (34 x 4).
  • Memory card interface (option MS-DOS format).
  • All setting and printed data are backed-up to non-volatile RAM and C-MOS RAM powered by lithium battery.
M252A Intelligent DOT Impact Printer
1.44MB
  • High-level Statistical Calculation Function Format
    --The function calculates Grand total, Sub-total, Maximum, Minimum, Average,Standard deviation, Histogram,
    　Displacement diagram and can print them.
  • Double print function enables to print the data sent from 2 indicators and total them.
  • Code classification function of 32 types/ ch can use numerical value.
  • Various interfaces, besides standard equipment of SI/F 2ch, the options of BCD input, RS-232C are prepared.
  • Power supply: AC100V ～ 240V (+10% ～ 15%), DC12 ～ 24V (±15%)
M255 Intelligent Printer for Desktop
  • Statistical. total, multi-adding (2ch), histogram, displacement chart printing.
  • Code No. divided-function classifies into up to 40 categories.
  • Whichever Ac power source or chargeable battery are selectable.
  • All settings and printed data are backed up to non-volatile RAM powered by a lithium battery.
LD514 Compact Size External Display
251KB
  • Numerical display tube: Character height 14 mm
  • LED for green figure display is adopted.
  • The function of display value selection (Indicated Value/ Gross weight/ Net weight/Tare weight).
  • All settings and printed data are backed up to non-volatile RAM powered by a lithium battery.
  • Display value is held by external signal
LD517 External Display with accumulation
302KB
  • Cumulative function can accumulate the indicated value up to 8 digits.
  • Adding function enables to add the values from more than one indicator.
  • Extension function displays source data as it is.
  • Data output function can send the display data to another device by SI/F interface (option).
LD557 External Display with excellent visibility
302KB
  • Numerical display: Character height 57mm, Visibility distance 30m, LED display with visible angle of 120 degrees.
  • Splashproof and dustproof structure allow various placement options.
  • Error display helps to grasp the trouble with accuracy.