search

F320

Compact DIN 96 x 48 mm Size Digital Indicator
 

Product Outline

F320 is most ideal in controlling production line quality.

F320 is a digital indicator with DIN 96 x 48 mm size for strain gauge type sensors. It is most ideal in controlling load pressure such as in pressing, compression and caulking work; as a torque controller of a nut runner or rotary devices and in production line quality control. It is built-in with the RS-485 (Modbus-RTU protocol) that allows easy construction of a control system that is integrated with a PLC or programmable display device.

製品イメージ
 
 

Specifications

ANALOG SECTION｜DISPLAY SECTION｜SETTING SECTION｜EXTERNAL INPUT/OUTPUT SIGNAL｜INTERFACE｜OPTION｜GENERAL SPECIFICATIONS｜Accessories

ANALOG SECTION
Sensor excitation voltage 10V or 2.5V DC ±10% (2.5V default setting); Output current: within 30mA
Signal input range -3.0 - +3.0mV/V
Equiv. input cal. range +0.5 - +3.0mV/V
Equiv. input cal. error within 0.1% FS (at 0.5mV/V input)
Zero adjustment range -2.0 - +2.0mV/V
Gain adjustment range +0.5 - +3.0mA / V
Min. input sensitivity 1μV / count (1/10000 guaranteed at 1mV/V input)
Accuracy
  • Non-linearity:
  • within 0.02% F.S. (at 3.0mV/V input)
  •  
  • Zero drift:
  • within 0.5μV/°C RTI
  •  
  • Gain drift:
  • within 25 ppm/°C
A/D converter
  • Speed:
  • 2000 times/sec
  •  
  • Resolution:
  • 24 bit (binary), approx. 1/30000 at 3.0mV/V
Analog filter 3, 10, 30, 100, 300, 1 kHz, low-pass filter (-6dB/oct.)
Peak hold function Digital peak hold at 2000 times/sec
 
DISPLAY SECTION
Display unit
  • 15mm character height:
  • 7-segment red LED numerical display (5 digits)
  •  
  • 5-digit numerals:
  • ±8.8.8.8.8 (display’s significant digit is 1 or not displayed)
  •  
  • Indicated value:
  • -19999 - +19999
  •  
  • Decimal points:
  • Selectable decimal point displaying position (88.888, 888.88, 8888.8, 88888)
Display items
  • Status display:
  • 5 red LED display for HI, OK, LOW, PEAK, HOLD
  •  
  • Display times/sec:
  • selectable from 3, 6, 13 and 25 times/sec
 
SETTING SECTION
Key switch FNC (+ / -), GAIN, CAL, ZERO, HOLD
Setting items Calibration: Zero / Span calibration (Actual load / Equivalent input calibration)

HI limit, LO limit, HI/LO limit comparison mode, hysteresis, digital offset, near zero

Digital filter, analog filter, motion detect (time), motion detect (range). Zero tracking (time), zero tracking (range), hold mode

Set value LOCK, calibration value LOCK, ZERO key ON/OFF, HOLD key ON/OFF, min. scale, display frequency, decimal place, excitation voltage

RS-485 communication condition, RS-485 ID number, RS-485 transmission display time, BCD data update rate, D/A converter zero setting, D/A converter full scale setting, D/A output mode, password
 
EXTERNAL INPUT/OUTPUT SIGNAL
  HI limit relay output, LO limit relay output, hold signal input, digital zero signal input
 
INTERFACE
  RS-485 communication interface (Modbus-RTU communication protocol)
 
OPTION
  BCD parallel data output interface (sink type)
BCD parallel data output interface (source type)
D/A converter (voltage output)
D/A converter (current output)
 
GENERAL SPECIFICATIONS
Power supply voltage 100V - 240V AC +10% - 15% (free power supply), 50/60 Hz, 12 - 24V DC (±15%) (Please specify when ordering.)
Power consumption 15W max
Inrush current (Typ): AC specifications 15A, 2msec: 100V AC average load condition (cold start at room temperature)
30A, 2msec: 200V AC average load condition (cold start at room temperature)
Inrush current (Typ): DC specifications 4A, 25msec: 12V DC average load condition (cold start at room temperature)
3A, 20msec: 24V DC average load condition (cold start at room temperature)
Operating conditions Temperature: Working temperature range -10 - +40°C; Storage temperature range -40 - +80°C
Humidity: 85% RH or less (non-condensing)
External dimensions 96 (W) x 48 (H) x 127.3 (D) [mm] (protruding parts not included)
Panel cutout dimensions 92 x 45 +1 -0 [mm]
Weight 0.7 kg
 
Accessories
  ・AC power supply cord*　1
・Terminator　1
・3P-2P conversion adapter*　1
・BCD output connector (with BCD option)　1
・Ferrite core for sensor cable　1
・Ferrite core for AC power supply cord*　1
・F320 Operation Manual　1
*Included only for AC specifications
 
 

Option

Model Description
BCO BCD parallel data output interface (Sink type)
BSC BCD parallel data output interface (Source type)
DAV D/A converter voltage output
DAI D/A converter current output
 
 

Optional Accessories

Model Description
CAAC3P-B3 AC Supply cord 3m
CAAC3P-CEE7/7-B2 AC Supply cord (Voltage resistance:250V) 2m
CN3P-2P 3P-2P converter plug for AC input cord
CN51 BCD output connector
TSU01 Lightning surge unit
TSU03 Lightning surge unit, DC specification
 
 

Download

Product CatalogueOperation ManualsExternal dimentionsSupport ToolsSoftware
GC2011
F320
Rev.1.06(1.73MB)
 
  • Download an operation manual, product appearance diagram, support tool or software after user registration.
  • Acrobat Reader software from Adobe Systems is required to view files in PDF format.