ANALOG SECTION｜SETTING SECTION｜INPUT/OUTPUT SECTION｜DISPLAY SECTION｜PRINTER SECTION｜GENERAL SPECIFICATIONS｜ACCESSORIES

ANALOG SECTION
Excitation voltage	10V DC ±5%, Output current; within 180mA, Ratiometric method (Up to 6 loadcells at 350Ω are parallel-connectable.)
Zero adjustment range	±2mV/V
Gain adjustment range	0.5 - 3.0mV/V
Min. input sensitivity	0.5μV / count
Accuracy	Non-linearity: within 0.01% FS Zero drift: within 0.2μV/°C RTI Gain drift: within 15 ppm/°C Noise: within 0.3μVp-p RTI (0.1 - 10 Hz)
Analog filter	None, digital filter only
A/D converter	Speed: 50 times/sec Resolution: 16 bit (binary)
Min. display resolution	1/10000

SETTING SECTION
Setting method	Keyboard operation (membrane switch with a key click buzzer)
Setting value storage	NOV RAM (Non-volatile RAM)
Setting value protection	Setting operation can be locked (LOCK).
Main setting items	HI-HI LIM, HI LIM, OK/NG, LO-LIM, LO-LO LIM, NEAR ZERO, TARE, UNIT WEIGHT, INTERVAL BORDER, COMPARISON CONDITIONS, etc.

INPUT/OUTPUT SECTION
External input signal	ON when shorted to COM terminal by contact (relay, switch) or non contact (transistor, open collector) Gross / net change, digital zero, subtotal, batch, table, hold, judgment, tare subtraction, feed, total, print, polarity reversal of net weight, selection
External output signal	Transistor’s open collector output (Emitter=COM terminal) Output is LO when transistor is ON. HOLD, HI-HI LIM, OK/NG, LO-LO LIM, WEIGHT ALARM, ERROR, NEAR ZERO, HI LIM, LO LIM, STAB, OPERATING
Interface	SIF：2-wire type serial interface

DISPLAY SECTION
Weight display unit	7 digits, 18 mm in character height, dedicated fluorescent display tube
Display value	5 digits, Minus sign on most significant digit.
Quantity display	4 digits, Sign; minus display, Unit; pcs
Display frequency	Selectable 3, 6, 13, 25 times/sec
Min. scale division	1 to 100
Decimal point	Selectable decimal place at 0/0.0/0.00/0.000
Center zero	True zero point (0±1/4 scale) or the center of each value is displayed.
Unit display	Selectable from t, kg, g, N. lb, none  kg ⇔ lb automatic conversion function selectable (weight) pcs (quantity)
Status display	CENTER ZERO, STAB, TARE, NET, GROSS, ZT, ZALM, LOCK, HI LIM, HI, GO, LO, LO LIM, HOLD, NZ

PRINTER SECTION
Print system	5 x 7 dot, impact printing
Print speed	Approx. 2 lines/sec (approx. 50 pcs)
No. of Print digits	24 digits

GENERAL SPECIFICATIONS
Power supply voltage	85 - 110V, 102 - 132V, 170 - 220V, 187 - 242V AC (Please specify when ordering), 50/60 Hz
Power consumption	Approx. 20VA
Operating conditions	Temperature: Working temperature range -10°C - +40°C Humidity: 85% RH or less (non-condensing)
External dimensions	263 (W) x 95 (H) x 183 (D) [mm] (protruding parts not included)
Weight	Approx. 2.2 kg

ACCESSORIES
AC input cord (3 m)	1
Spare fuse (1A)	1
External input / output signal connector	1
Loadcell connector	1
Crimping terminal	5
Ink ribbon cassette	2 (1 pc. installed in the main unit)
Rolled paper	1
Nameplate seal	1
Operation Manual	1

Model	Description
PP350/10	Rolled paper (10 rolls)
PP350-2P/10	Rolled paper 2-sheet copy (10 pc.)
PR350/10	Ink ribbon (10 pcs)
CAAC2P-B3	AC input cord (3 m)
CAAC3P-CEE7/7-B2	AC input cord (withstand voltage: 250V) (2 m)
CA573Y31	57/14p (6-core) cable (cable end is separated) (3 m)
CA574030	57/14p-PRC (6-core) cable (0.3 m)
CN20	Loadcell connector 57 series (14p)
CN21	57 series 36p connector for external I/O

Product Catalogue	Operation manual	External dimention	Support tools	Software
	F770 Rev.1.14(3.33MB)