Product outline

UTMⅡ/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20000 times/sec., TM700 can support the high response time of UTMⅡ/UTMV (1 kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.
Features
  • Torque monitor for UTMⅡ/UTMV.
  • Display the curves of torque, rotation speed, and power.
  • Enable the cogging torque measurement with UTMⅡ/UTMV.
  • Easy connection to UTMⅡ/UTMV with one cable.
  • Operation power can be supplied to the UTMⅡ/UTMV (and to the optional rotary encoder as well).
  • Upper/lower limits & hold function.
  • Ideal for applications such as nut runners, motor test benches, engine test bench, mixer, wind power generation, etc….
Sample display

External dimension


Specifications

Torque input (voltage input)
Signal input range -5 to +5 V Input impedance:1 MΩ or more
Accuracy Non-linearity:within 0.02% FS±1 digit
Zero drift: within 0.2 mV/℃ RTI
Gain drift : within 0.01%/℃
Analog filter Low pass filter (-6 dB/oct.)
Select from 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz
A/D converter ・ Speed:20000 times/sec
・ Resolution:24 bit (binary)  Approx. 1/30000 against 5 V
Monitor output Output level :Input voltage return (for tester)
 
Input for high-speed rotation (open-collector pulse)
: for standard UTMⅡ/UTMV.
Maximum input frequency In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr)
Select from 60, 40, 20, 12, or 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50 μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic = Approx. 10 mA)
 
Input for low-speed rotation (open-collector pulse)
: for UTMⅡ with rotary encoder option
Maximum input frequency Approx. 1000 rpm
Minimum input frequency 0.1 rpm
Minimum detection pulse width 5 μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic = Approx. 10 mA)
 
Display section
Display unit 3.5 inch TFT color LCD
 
External I/O signal
External output (8) ex) high and low limit outputs
External input (10) ex) hold control input, digital zero input(DZ)
 
Interface
Standard SIF:2-wire serial interface
USB:USB interface
Option D3V:D/A converter voltage output (3 ch)
 
General specifications
Power supply DC 24 V (±15%)
Power consumption 6 W typ.
Operating conditions Operation temperature:-10 to +40℃, storage temperature: -40 to +80℃
humidity:85% RH or below (non-condensing)
Dimension 96(W) × 96(H) × 138(D) mm (Not including projections)
Weight Approx. 1.0 kg
CE marking certification EMC directives EN61326-1
 


Attachments
Operation manual 1
External input/output connector 1
Cable for connecting UTMⅡ/UTMV 2 m 1
Operating tool (with D/A converter(3 ch) option) 1
 

Optional accessories

Model Description
DTC2 Case for TM700 (with AC power supply)
CA372-I/O Cable with FCN connector at one-end 3 m
CA81-USB miniUSB-computer USB cable 1.8 m
CATM21-M Cable for connecting UTMⅡ/UTMV 2 m
CATM51-M Cable for connecting UTMⅡ/UTMV 5 m
CATM(R)21-M Cable for connecting UTMⅡrotary encoder 2 m
CATM(R)51-M Cable for connecting UTMⅡrotary encoder 5 m
CN50 FCN series I/O connector (with cover)
CN55 FCN series I/O connector (with diagonal cover)
CN73 D/A converter(3 ch) connector
CN90 Waterproof plastic connector for UTMⅡ/UTMV
CN91 Waterproof plastic connector for UTMⅡrotary encoder
GMP96x96 Rubber seal
TSU03 DC lighting surge unit



Please note that there are possibilities of individual differences in a color tone on display devices such as LEDs, fluorescent display tubes and LCDs due to manufacturing process or production lots.



Download

Product catalogue(PDF)
⇒Download Page
Operation manual(PDF)
External dimension
DXF
(ZIP)
PDF
Support tools
Software