Loadcell Converters (For Weighing)

The following is a list of loadcell converters. They reliably amplify weak loadcell signals. They are comprised of a loadcell excitation voltage circuit, an extremely small voltage amplification circuit, a zero gain adjustment circuit, a low-pass filter and other components. They are used to convert a weak loadcell signal proportional to the weight to the signal best suited for the application.

Loadcell converter

LC400

* High-accuracy and high-power loadcell converter

* Built-in excitation voltage. 3 levels of 2.5V, 5V and 10V DC switchable

* Capacitance of excitation voltage is 120mA. Up to 4 loadcells at 350Ω/loadcell parallel-connectable

* Coarse adjustment and fine adjustment are prepared for both zero adjustment and gain adjustment

* Standard equipped with 4 to 20 mA current output

Loadcell converter

LC240

* Low-drift and low-noise loadcell converter

* Built-in excitation voltage. 6 levels of 2.5V, 2.9V, 4V, 5V, 6.6V and 10V DC switchable

* Capacitance of excitation voltage is 120mA (when excitation voltage is 10V). Up to 4 loadcells at 350Ω/loadcell parallel-connectable

* Coarse adjustment and fine adjustment are prepared for both zero adjustment and gain adjustment

* Standard equipped with current output of 4 to 20mA

Loadcell converter

LC210/LC210AZ

* Basic type loadcell converter

* Compact type of 44 mm (W) x 110 mm (H) x 110 mm (D)

* Simple design allows for a wide range of applications for a variety of instrumentation

* Built-in applied voltage

* Electronic auto zero (LC210AZ)

Plug-in type loadcell converter

LC1111

* High-performance compact loadcell converter

* Compact size of 38 mm (W) x 50 mm (H) x 93.5 mm (D)

* Built-in excitation voltage. Up to 4 loadcells at 350Ω/loadcell are parallel-connectable

* Standard equipped with current output of 4 to 20mA

* Simple design allows for a wide range of applications for a variety of instrumentation

* For AC or DC, please specify when ordering