* “Process monitoring” and “Control” for Servo Press Machines
* ”Digital Indicator” and “Motion controller” are 2 in 1!
* Available for ”7.0 inch”.
PRESS FORCE ANALYZER
PFA
Force measurement
Our digital indicators are used with load cells to monitor force applied in assembly operations like press-fitting and riveting for automated quality check (OK/not OK evaluation) of products.
Digital indicator with SD card slot & high sampling rate
FS2000
* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)
* Multi-point judgment (OK/NOK judgment can be performed on multi points in one process. Max. 5 points)
* Easy parameter setting allowed by direct touch on touch panel
* Save measurement data and setting values in an SD card
* 25000 times/sec. high-speed digital processing
DIN-rail mount digital indicator with CC-Link interface
FC400-CCL-FA
* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.
* Digital low-pass filter is available!
* Digital peak hold, Hi & Lo judgement
* Lightweight and compact body to fit into limited space in a control panel
* DIN-rail mountable!
* USB interface for PC connection
DIN-rail mount weighing indicator with D/A converter
FC400-DAC-FA
* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.
* Digital low-pass filter is available!
* Digital peak hold, Hi & Lo judgement
* Lightweight and compact body to fit into limited space in a control panel
* DIN-rail mountable!
* USB interface for PC connection
DIN-rail mount digital indicator with EtherNet/IP & USB as standard features
FC400-EIP-FA
* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.
* Digital low-pass filter is available!
* Digital peak hold, Hi & Lo judgement
* Lightweight and compact body to fit into limited space in a control panel
* DIN-rail mountable!
* USB interface for PC connection
DIN-rail mount digital indicator with EtherCAT interface
FC400-ECT-FA
* High-speed A/D conversion and powerful digital processing capability of 2400 times/sec.
* Digital low-pass filter is available!
* Digital peak hold, Hi & Lo judgement
* Lightweight and compact body to fit into limited space in a control panel
* DIN-rail mountable!
* USB interface for PC connection
SD card available graphic display/ touch panel type digital indicator
F381A
* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)
* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)
* Standard equipped with displacement input (A 2-dimensional waveform comparison is possible by using both force and displacement inputs)
* Save measurement data and setting values in an SD card
* Easy parameter setting allowed by direct touch on touch panel
* 4000 times/sec. high-speed digital processing
Digital indicator for voltage/ current output
F388A
* Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform)
* Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment)
* Save measurement data and setting values in an SD card
* Easy parameter setting allowed by direct touch on touch panel
* 4000 times/sec. high-speed digital processing
LCD touch panel display digital indicator
F395
* Waveform comparison function
* Visibility and operability improved by application of the color LCD and touch panel
* Communication function with control of sampled waveform uploaded to PC by spreadsheet software
* High-speed digital circuit with processing capability of 4000 times/sec. (max)
* 20 types of hold modes including peak, valley, relative maximum value, relative minimum value and inflection point are switchable by external signal
Graphic display/ touch panel type digital indicator
F372A
* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform
* Extensive Hold functions that enable holding an accurate point and OK/NG judgment function
* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included
* Easy and simple setting operation by directly touching touch panel
* Compact square DIN 96 size
* High-speed digital processing capability of 2000 times/sec.
Graphic display/ touch panel type digital indicator for voltage and current output
F377A
* Directly connectable to Voltage±10V, Current±20mA
* Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform
* Extensive hold functions that enable holding an accurate point and OK/NG judgment function
* Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included
* Compact square DIN 96 size
* High-speed digital processing capability of 2000 times/sec.
Compact DIN 96 x 48 mm Size Digital Indicator
F331
* Convenient DIN 96 x 48 mm size that can be easily mounted on control panel
* Standard built-in USB interface
* Special PC application software
* High-speed digital processing capability of 300 times/sec
* Equivalent input calibration function
2 channel input type DIN96□ size digital indicator
F350
* Calculation and judgment outputs are available for 2ch input values of strain gauge type sensors
* Calculation functions (ch1+ch2, ch1-ch2, |ch1-ch2|, High select, Low select)
* 9 points of judgment outputs are equipped
* Sampling speed as high as 3000 times/sec. on each channel
* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor
* Analog monitor output
Digital indicator with fast peak hold function
F325
* Fast analogue peak hold
* Digital peak/sample hold
* High-speed digital circuit with processing capability of 3000 times/sec.
* You could chose either RS-485 ( Modbus-RTU /UNI-format) or SI/F(Unipulse original serial interface) as a standard interface
* The high-performance filtering functions by using both analogue and digital technology
* Free software for parameter setting is available
Compact square DIN 96 type digital indicator
F340A
* Analog peak hold function providing high-speed peak hold
* Digital zero function for one-touch zeroing of indicated value
* Compact square DIN 96 size
* High-speed HI/LO limit comparison function
* Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor
Digital indicator for OMRON SYSMAC CJ1/CJ2/NJ
F130
* Direct connection to OMROM SYSMAC CJ1/CJ2/NJ network system
* High-speed sampling of 3000 times/sec.
* Completely seamless communication between CJ1/CJ2/NJ and F130
* System development time is reduced and maintenance management modifications and servicing are easy
* With greatly simplified inter-equipment wiring, cost advantages can be expected
Portable digital inicator
F490A
* Lightweight design of 290g for portable use
* Measurement data is recorded in CSV format in its internal memory
* Recorded data can be referred to and copied via USB interface
* Various display modes such as graphic display and recorded data display prepared
* Multi-calibration function that allows six calibration values to be stored and read
* 4 types of Hold functions can set the data observation range
Compact load cell USB converter
FS10
* You can monitor the load cell outputs on PC easily
* 1200 times/sec. high-speed digital processing
* Pass/fail test (HH・HI・LO・LL)
* Easy to perform the initial setup and calibration
* Up to 10000 measurement and status data can be recorded
* The module is powered by USB, and it can supply excitation voltage to the connected load cell as well
